Rentals

The SANY STH1056A telehandler has been 100% designed, built, and tested for your toughest jobs. To ensure that you can count on years of trouble-free operation, we’ve pushed this machine to the limit with durability testing including over 10,000 laps around our rough terrain test course and over 20,000 cycles on the lift structure at full rated load. The STH1056A telehandler also offers excellent visibility as the operator can see all 4 tires from the seated position with no unobstructed views behind the machine. Standard features include wide-angle rearview camera and reverse sensing system, LED work lights, flashing beacon, and lift hook. You can also choose from an array of extra options such as an open or fully enclosed cab with heat and AC, a selection of fork carriages and fork combinations, and your choice of 74 hp with no DEF requirements or 130 hp allowing you to configure the STH1056A to perform for your needs.

- Deutz engine, Dana axles and transmission, Parker hydraulics, and a Kawasaki load sense piston pump

- Large, spacious cab offers improved operator comfort and reduced fatigue

- Axle-mounted stabilizers allow for smoother frame leveling when deployed

- Wide-angle rear camera gives unobstructed view behind the machine

Reverse sensing system

- Simple maintenance with easy fluid level check and convenient access to maintenance items with side-mounted engine

Overall Dimensions

Maximum Lift Height (17.13 m, 56’ 2”)
Maximum Forward Reach (13.08 m, 42’ 11”)
Height, Stowed (2.55 m, 8’ 4")
Length, Stowed (Without Forks) (6.28 m, 20’ 7”)
Width ( 2.56 m, 8’ 5”)
Wheelbase (3.49 m, 11’ 5”)
Ground Clearance (Centre) (0.46 m, 1’ 6”)
Ground Clearance (Axle) (0.45 m, 1’ 6”)
Weight (15,100 kg, 33,290 lb)

Performance
Maximum Lift Capacity (4,536 kg, 10,000 lbs)
Lift Capacity at Maximum Height (2,267 kg, 5,000 lbs)
Lift Capacity at Maximum Reach (1,361 kg, 3,000 lbs)
Boom (Raise/Lower) (11 sec, 14 sec)
Boom (Extend/Retract) (15 sec, 16 sec)
Frame Leveling +/- (10 degrees)
Maximum Drive Speed (32 kph, 20 mph)
Outside Turning Radius (4WS) (4.30 m, 14’ 11”)
Auxiliary Hydraulic Flow (63 L/min, 17 GPM)
Auxiliary Hydraulic Pressure (17 MPa, 2,466 psi)
Standard Tire Size (400/75-28)

Capacities
Power
Torque (488 Nm, 360 lbf)
Electrical System (24 volt)
Hydraulic Tank Capacity (124 L, 33 gal)
Hydraulic System Capacity (159 L, 42 gal)
Fuel Tank Capacity (135 L, 36 gal)

Components
Engine (Cummins QSF3.8)
Transmission (Dana VDT12000)
Axles F/R (Dana 223, Dana 212)
Hydraulic Pump (Kawasaki Load Sense Piston Pump)
Hydraulic Manifold (Parker)